Xenon Sil 1.1
$7.45
Xenon Sil is a lightweight polyester sil fabric. It is low a stretch fabric and it has 2000 mm (or more) head pressure and is an excellent material for tarps, tents or any place a lightweight waterproof fabric is needed.
Sold by the linear yard.
Description
Xenon Sil is a lightweight polyester sil fabric. It is low a stretch fabric, has 2000 mm (or more) head pressure and is an excellent material for tarps, tents or any place a lightweight waterproof fabric is needed.
Need a continuous piece of fabric longer than 40 yards? Please contact us directly at: sales@dutchwaregear.com
*All Specs are estimates and may vary from color to color and batch to batch.
Specs
- Material – Polyester
- Fabric Width: 58-60-inch
- Weight per sq yard 1.10 oz / 31.18 g
- 20 Denier
- Coating Siliconized
- PFC Free
- Tear Strength ASTM D1424
- Warp 4.9 lbF
- Weft 3.8 lbF
- Tensile Strength ASTM D5034
- Warp 49.7 lbF
- Weft 40.2 lbF
- Air Permeability ASTM D737
- 0 ft3/ft2/min (CFM)
- UV Transmission AATCC 183
- Mean UF Protection Factor (UPFm) 28
- UV -A Blocking (mean) 88.67%
- UV -B Blocking (mean) 98.48%
- UPF Class 20
- Color Fastness to Light AATC 16 – 4
- Hydrostatic Head (virgin) AATCC 127 – ~2000mm
- Common uses Tarps, Tents, & Bivys, Stuff sacks
Silpoly
SilPoly XL
Silpoly Wide
Additional information
| Weight | 54.21 g |
|---|---|
| Dimensions | 1 × 1 × 1 in |
| Color | Black, Purple, Charcoal Grey, Coyote Brown, Poppy Red, Blaze Orange, Dark Olive, Forest Green, Moroccan Blue |
| Material | Polyester |
| Width | 58 – 60 inches |
| Denier | 20 |
| Coating | Silicone |
| Tear Strength ASTM D1424 | Warp 4.9 lbF, Weft 3.8 lbF |
| Tensile Strength ASTM D5034 | Warp 49.7 lbF, Weft 40.2 lbF |
| Air Permeability ASTM D737 | 0 ft3/ft2/min (CFM) |
| UV Transmission AATCC 183 | Mean UF Protection Factor (UPFm) 28, UV -A, Blocking (mean) 88.67%, UV -B Blocking (mean) 98.48%, UPF Class 20 |
| Color Fastness to Light AATC 16 | 4 |
| Hydrostatic Head (virgin) AATCC 127 | 4000mm |
| SKU | HAO010 |
|---|
Question
refleks –
Is this Ripstop material?
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Legitomous (verified owner) –
I was looking for a durable, light weight, waterproof fabric for a tipi project. My design was a 6 man tipi so stretch was a concern, and Xenon is very rigid. Sil Xenon fit the bill perfectly. It was tricky to work with at first due to the nature of the light weight and coated fabric, but once I got used to it it was good to work with. I discovered that it irons well at low temps making flat field seems a lot easier. The project finished out well, and after weighing in it came in at #11.2 with tipi, stakes, center pole, and stove. Tipi is #3.6. The fabric has had no poor reactions to heat especially at the cone where the stove jack is. I field tested it early spring at over 9000 ft with excellent results. Being spring it brought chilly nights, and non stop rain. Me and my boys were warm and dry and the tipi became base camp for our group since it is as huge tent. Without the tipi the trip would have been short lived since we had several youth with us who’s ability to weather rain and chill is limited. Xenon and other fabrics I got from Dutch met all my needs and expectations. Thanks Dutch for providing killer products and fabrics!
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Question
CarlDrach –
Xenon Sil 1.1
Is this a nylon or polyester. Intend to use it as a ground cloth.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
admin –
This is Polyester.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal
Question
StevenHoldman –
Does this fabric have a right and wrong side? May be my eyes, but both sides look the same to me.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
admin –
There isnt a right and a wrong side to the fabric, you are correct.
Upvote if this was helpful (2) Downvote if this was not helpful (0) Flag for removal
Question
SalGal –
What Denier is the 1.1 Xenon?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Carolyn Palmer –
20 Denier
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Marek Pechmann –
Hi, is this fabric suitable for hammock chair?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Carolyn Palmer –
We do not recommend using this fabric as it will bunch very badly however I would point you in the direction of the sil nylon which is what our hammock chair is made from.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal
Question
Dave Denny –
How is this product ordered? If I order QTY what size material will I receive?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
DutchWare Gear –
One unit equals one yard of fabric. If you order 2 yards of fabric it will be 2 continual yards of fabric.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
conorwilliams –
is 1.1 oz the finished weight or weight before coating, if before coating what is the finished weight?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Carolyn –
It is a finished weight.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal
Question
ripepuerh –
Is there any difference apart of HH and weight between XENON SIL 1.1 and XENON SIL 5300 ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Carolyn –
Both fabrics are made of the same material however the 1.1 is a heavier weight fabric.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
lindakaye06 –
Is this fabric appropriate to make rain pants out of if you use a seam sealer product (I.e. is it breathable and waterproof)? If not, which product do you recommend? I have a hard to fit figure and sew very well.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dave Gantz (verified owner) –
Xenon is waterproof but not breathable. You’ll want to use Helion for waterproof breathable rain pants: https://dutchwaregear.com/product/helion-half-yard/
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
John Schneider –
Can Xenon Sil 1.1 be used for a tent floor? How does the abrasion resistance compare to sil Nylon?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dave Gantz (verified owner) –
Both fabrics are 20 denier with a ripstop grid. Sil 1.1 has a higher waterproof rating and less stretch than Sil Nylon.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
tommycatanzarita –
Hello,i need 3 yds of the blaze orange,how would i go about ordering it,just put 3 in the QTY?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dave Gantz (verified owner) –
Yes, if you order 3 units, we’ll send one piece that is 3 yards long.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Christal Cori –
How wide is it?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dave Gantz (verified owner) –
58″-60″
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
spardue89 –
How can I seam seal this fabric after sewing?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dave Gantz (verified owner) –
https://dutchwaregear.com/product/seam-grip-sil-sealant/
Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal
Question
Luke –
Is the coating 100% silicone or is it a sil/Pu coating?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dave Gantz (verified owner) –
Silicone.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal
Question
Leo (verified owner) –
Heyyo
I plan on using this material for making a tarp,
So wanted to ask if it’s possible to tape it, like DCF and so.
Thanks 🙂
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dave Gantz (verified owner) –
We have tape for our own tarps made with this fabric, but we don’t have any for sale.
Upvote if this was helpful (0) Downvote if this was not helpful (1) Flag for removal
Question
stitchandpop83 –
Does this fabric contain PFAs?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dave Gantz (verified owner) –
At this time we cannot guarantee that this fabric does not include DWR with PFCs. We are working on transistioning all of our fabric to PFC free DWR.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
douglashaug –
How is this fabric as to flame resistance? As a quick shelter with a small fire does one have to worry about sparks melting or igniting the fabric?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Alex Thomas –
This fabric is not flame resistant at all. If an ember falls on it, it will melt.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal
mpevans007 (verified owner) –
I used dark olive and made a standard hex tarp that weighs 381g, including double-ended stuff sack with tie downs and tie outs, bungies and D-rings. It’s a beautiful tarp.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Question
knmgpt –
Is this the same fabric in terms of materials and construction as the Xenon Wide? Or is there a difference between them? Looking to make a rain poncho out of it.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Alex Thomas –
They are both VERY close, but the Xenon wide has a slightly different coating on it.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal