ARGON 67
$10.70
ARGON 67 Fabric is specially made for us as the cutting-edge ultimate nylon quilt material. It resists wind and sheds water enough to be the outer shell of a quilt, yet it is breathable enough to be used as the inner shell. It has a very tight weave, rip stop grid, has a quality DWR coating, is calendared and completely down proof (5 out of 5-star rating independently tested by IDFL). Sold per linear yard of fabric.
Description
ARGON 67 Fabric is specially made for us as the cutting-edge ultimate nylon quilt material. It resists wind and sheds water enough to be the outer shell of a quilt, yet it is breathable enough to be used as the inner shell. It has a very tight weave, rip stop grid, has a quality DWR coating, is calendared and completely down proof (5 out of 5-star rating independently tested by IDFL). The material has a silky feel and is baby soft. Made with ripstop for extra tear strength and peace of mind.
Need a continuous piece of fabric longer than 40 yards? Please contact us directly at: [email protected]
*All Specs are estimates and may vary from color to color and batch to batch.
Specs
- Material – Nylon
- Fabric Width: 59-60-inch
- Weight per sq yard 0.67 oz per square yard
- 10 Denier
- Coating DWR
- PFC Free
- Calendered
- Tear Strength ASTM D1424
- Warp 0.8 lbF
- Weft 0.4 lbF
- Tensile Strength ASTM D5034
- Warp 27.4 lbF
- Weft 18.1 lbF
- Air Permeability ASTM D737
- 7.85 ft3/ft2/min (CFM)
- UV Transmission AATCC 183
- Mean UF Protection Factor (UPFm) 16
- UV -A Blocking (mean) 84.81%
- UV -B Blocking (mean) 95.76%
- Color Fastness to Light AATC 16 – 4
Additional information
| Weight | 31.48 g |
|---|---|
| Dimensions | 1 × 1 × 1 in |
| Color | Burnt Orange 67 Taffeta, Purple, Charcoal Grey, Titanium Grey, Moss Green, Brilliant Blue, Saddle Brown, Dark Olive, Forest Green, Brick Red, Black (ripstop), Black 67 Taffeta, Moroccan Blue |
| SKU | HAO001 |
|---|
George of the forest –
I used this for the inside layer of my down underquilt.
I used this for the inside layer of my down underquilt. So far after a few dozen uses, and lots of packing down, it has yet to leak a feather (900 fp down also aquired from dutch). I’ve been very pleased with the product in every aspect (quality, durrability, water & wind resistance, compactability, and comfort).
(0) (0) Watch Unwatch
Question
Leo (verified owner) –
Heyyo
I plan on using this material for the upper part of a bivy
So wanted to ask if it’s possible to tape it, like DCF and so.
Thanks 🙂
(0) (0) Watch Unwatch
Dave Gantz –
We don’t have tape for our Argon fabrics.
(0) (0)
Question
jbyer323 –
What’s the CFM rating?
(0) (0) Watch Unwatch
Dave Gantz –
We haven’t had this tested yet.
(1) (0)
Question
otters_tricks –
Some of the Argon 67 colour options have “(taffeta)” in the title. What does this mean, does it still have the ripstop weave? Cheers – Murdo
(0) (0) Watch Unwatch
Dave Gantz –
Taffeta is a smooth, silky, plain weave. It is generally used for the inside shell of quilts.
(0) (0)
Question
mtm2021 –
Is this fabric made in the USA?
(0) (0) Watch Unwatch
Sister4 –
I have just finished my 2nd quilt with this material and it is fun to work with.
I have just finished my 2nd quilt with this material and it is fun to work with. It is soft and creamy. When I sleep in the quilt it is very comfortable and not at all sticky. I just love to work with it. I used the Argon 90 for the outside shell. Thought it would be sturdier.
(0) (0) Watch Unwatch
Question
relloboy –
How wide is your Argon 67?
(0) (0) Watch Unwatch
Question
mhesshome (verified owner) –
Before I start sewing with this fabric, the shiny side is the inside or the wrong side when sewing and the dull or matte side is the outside or right side when sewing. Correct?
(0) (0) Watch Unwatch
DutchWare Gear –
It is personal preference as to which side you want on the outside and on the inside. It will perform the same no matter which way it sewn.
(3) (0)
Question
Eidon Hamamlow –
Would a single layer of Argon 67 Black ripstop be too transparent for use as windpants / laundry shorts?
(0) (0) Watch Unwatch
Carolyn Palmer –
I would definitely tell you that you will see the outline through the ARGON 67. However the ARGON 90 will be a much safer option when it comes to not being able to see through the fabric.
(1) (0)
MayyK –
I used the black taffeta for the liner of my latest synthetic quilt.
I used the black taffeta for the liner of my latest synthetic quilt. It is amazing. So soft and comfortable, so light. It isn’t too flimsy that its hard to work with. When I build my next down quilt, I am definitely coming back for that black taffeta lining!
(0) (0) Watch Unwatch
Maria Champion –
I wrongly thought I had found the softest lightest fabric some months ago, on another site.
I wrongly thought I had found the softest lightest fabric some months ago, on another site.
Some weeks ago, I came across an excellent post regarding this Argon and decided to give it a go.
The softness and lightness are beyond compare. It took my breath away “THIS IS THE REAL BLING”
I sleep in a hammock every night and have done so since throwing the beds out some years ago.. For me The best sleeping system ever to come to this world
It may not look as pleasant as a well made bed but that is only to sight. A restful sleep, is I think what we all need and this beats the heck out of any bed
I see now why the owner terms this section DIY Heaven !
It goes well with the Argon 90 as an outer for quilts
The shipping is faster than Iffter the Shifter. Less than a week to the UK.
Many thanks for supping
(0) (0) Watch Unwatch
Question
ryan-6008 –
Is the DWR for this material PFC/PFAS-Free?
(0) (0) Watch Unwatch
Customer Service –
Yes it is. =)
(0) (0)