Linelocs 3 (Single)
$0.36
These work great for adjustable tie outs on your tarp and work best with 1.5 to 2.5 mm lines.
Description
These work great for adjustable tie outs on your tarp and work best with 1.5 to 2.5 mm lines. These can be sewn on with 1/2-inch grosgrain or webbing.
Dennis wilson –
I bought a dozen of these just try and they work great.I bought a dozen of these just try and they work great. Very simple and easy to use. Seems to bea recurring theme with
DutchBling.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Question
DennisCarroll –
Would these work as sew in linelocks? How wide is the fixed side?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
admin –
Yes they are designed to work with 1/2 inch grosgrain.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Ross (verified owner) –
Great Product
Excellent for adding secondary suspension to an under quilt or for tie outs on a tarp.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Question
Daniel R MacDougall –
Do these work with shock cord? Will they work with 3/32 or 1/8 or both?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Carolyn Palmer –
It will work with both sizes
Upvote if this was helpful (2) Downvote if this was not helpful (0) Flag for removal
Question
Jesse Johns –
Does this work with 1.8mm reflect it?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
DutchWare Gear –
Yes, it will work with 1.5mm to 2.5mm rope so the 1.8mm will be good.
Upvote if this was helpful (0) Downvote if this was not helpful (1) Flag for removal
jstevensen (verified owner) –
For the past couple of days, I’ve been testing different hardware with my tarp. I can confirm, that in light afternoon winds, all 4 Line Loc 3’s slipped. Despite the advertised support of 1.5 to 2.5 mm lines, these line locs could not hold 1.8 mm Reflect-It.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
hewho7 (verified owner) –
I bought a few as backup for the exact same thing on my tent, Six Moon Deschutes Tarp Tent. The lock basically holds most of the stress on the tent. The tarp tent is designed around a single trekking pole and the front line pulls the pole forward, supplying tension to the rest of the fabric and tie-outs. It has to be tight, and the lock has never slipped a single mm as far as I can tell. I tested these new ones in particular an 1.5 and 2.1 mm tarred bank line and on the same line on my tent. I couldn’t get them to slip the least bit. “Lock” is the correct term. Going to order a bunch more.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Question
tlgrimmy –
I have a pack with 1/2″ grosgrain loops already sewn in. Do you think I would compromise the strength of the lineloc too much if I took a dremel cutoff wheel and cut a small slit in the center of the grosgrain attachment portion to allow me to feed the grosgrain loop onto the Lineloc? They will be used with 3mm cordage to lash items to the bottom of my pack (up to a 3.5lb packraft in terms of maximum load).
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Alex Thomas –
With a low weight on them, i would think it would be ok but i can’t promise that. Best way to know for sure is to test it out.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal