Beastee Dee® Rings

$0.15$0.35

These are 1-inch, 3/4-inch or 1/2-inch Beastee Dee® Rings. They are very strong and can take the tip of a hiking pole to put your tarp in porch mode. They weigh just .43 grams each. Great as a finishing touch for your DIY XENON tarp.

Options
D-Ring Size

Clear selection

Description

These are 1 inch, 3/4-inch or 1/2-inch Beastee Dee® Rings. They are very strong and can take the tip of a hiking pole to put your tarp in porch mode. They weigh just .43 grams each. Great as a finishing touch for your DIY XENON tarp.

Specs:

  • 1/2-inch Beastee Dee® Ring: interior hole diameter 1/4-inch or 6mm
  • 3/4-inch Beastee Dee® Ring: interior hole diameter 3/8-inch or 10mm
  • 1-inch Beastee Dee® Ring: interior hole diameter 9/16-inch or 14mm

Additional information

Weight N/A
Dimensions 1 × 1 × 1 in
SKU DUR007

Share your thoughts!

Let us know what you think...

What others are saying

  1. One person found this helpful

    Question

    lepine.martin

    To be functional with the majority of trekking poles, would it be best to use the 1″ or 3/4″ rings on the tie outs for either porch mode or going to ground? Just looking to get some advice before grabbing the grosgrain and d-rings.

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Question

    CSH

    What is the diameter of the hole on the 1/2″ beastee dee rings?

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Carolyn

      Carolyn

      about 1/4″

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Question

    umana.juanignacio

    I need to use the ring to fit the end tip of a tent pole that is 5/16″ (8 mm) in diameter, what ring will it work for this?

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Carolyn

      Carolyn

      If the tip is 5/16″ is literally a toss up between the 1/2″ and 3/4″ beastee d ring. The opening on the 1/2″ was about a 1/4″ and then the 3/4″ I believe will be to big.

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Question

    zwshap

    What is the diameter of the hole in the 1” beastee?

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • One person found this helpful
      Carolyn

      Carolyn

      14.5mm or a little over a 1/2″

      (1) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Question

    simonkemp

    Can a Hookworm fit over a 1/2″ dee ring?

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Carolyn

      Carolyn

      no

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Question

    Jeffery Stroud

    Would a tato tarp connector be able to slide the plastic end through the 1 inch beastee d-ring? Thank you 🙂

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • One person found this helpful
      Dave Gantz

      Dave Gantz

      Yes, the T-end will fit, when turned, through this D-ring.

      (1) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. Question

    bearcwy

    What size grosgrain should I use on the Beastee Dee’s?

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

Continue as a Guest

Don't have an account? Sign Up