April 14, 2016
posted in: Tutorials
In this tutorial article, we are going to show you how to make your own no sew Cuben Fiber double ended stuff sack.
Project Overview
| Skill Level | Estimated Time | Estimated Cost |
| Beginner | 25 Minutes | $ |
Materials and Tools
| Materials Needed: | Tools Needed: |
| 18″ x 16″ Dyneema® Composite | Scissors |
| 2 Mini Cord Locks | Ruler/Tape Measure |
| 4 Ft Drawcord | Utility Knife |
| 50″ Dyneema® Composite Adhesive | |
| 8″ Dyneema® Composite Tape |
You can purchase the full kit from us here.
Step 1: Layout fabric flat on the table with the longer sides at the top and bottom. 
Step 2: Make a 1 ¼ inch fold from both sides and make a crease. You will now fold the corners in like the pictures show to make room for your draw cord.
Step 3: Place a piece of adhesive on one side with now channel and peel off the white backing. 
Step 4: Roll the stuff sack adhere one side to the other making sure to get a flat taped seam. 
Step 5: Thread draw cord through channels and add cordlocks. 
Step 6: Reinforce near the draw cord holes with a 4 inch piece of the cuben fiber tape. 
You should now have a completed no-sew cuben fiber double ended stuff sack ready to use!
Related Stuff Sack DIY Projects
